Why Wear Mats
Playground wear mats solve one of the most common maintenance problems on any play surface: the bare, compacted spots that develop under spinners, at the bottom of slides, and around other high-traffic equipment. Left unaddressed, those worn-down areas create tripping hazards and expose the ground beneath your safety surfacing. Action Play Systems wear mats drop into place over these zones, protecting the surface underneath and keeping the overall playground looking consistent and well-maintained. Available in seven sizes to fit the most common playground equipment footprints. Call our sales team to place your order.
Available Sizes and Specifications
4′ Spinner Wear Mat
- 48″ diameter
- 6″ center opening
- 2″-thick, beveled edges around the perimeter
- 110 lbs.
6′ Circular Wear Mat
- 2-piece wear mat
- 6′ diameter
- 6″ center opening with 6″ plug for a uniform mat
- 2″-thick beveled edges around the perimeter
- 235 lbs.
8′ Circular Wear Mat
- 4-piece wear mat
- 8′ diameter
- 6″ center opening with 6″ plug for a uniform mat
- 2″-thick beveled edges around the perimeter
- 355 lbs.
10′ Circular Wear Mat
- 8-piece wear mat
- 10′ diameter
- 4′ center opening with 3′ radius wear mat
- 2″-thick beveled edges around the perimeter
- 575 lbs.
12′ Circular Wear Mat
- 10-piece wear mat
- 12′ diameter
- 6″ center opening, solid mat
- 2″-thick beveled edges around the perimeter
- 840 lbs.
14′ Circular Wear Mat
- 16-piece wear mat
- 14′ diameter
- 6′ center opening, 4′ radius wear mat
- 2″-thick beveled edges around the perimeter
- 1,075 lbs.
8′ x 4′ Rectangle Wear Mat
- 8′ x 4′ x 2″ wear mat
- 2 interlocking halves
